1、濟南防水http://www.tianyujian.com/談到竣工的防水層不得有滲漏和積水表象，一切資料有必要契合質量標準與規劃需求。
Speaking completed Jinan waterproof waterproof layer may not have the appearance of leaks and flooding, all the information necessary to fit the quality standards and planning needs.
2、濟南防水介紹防水層鋪貼辦法和卷材搭接次序應契合施工工藝規則，搭接寬度應契合需求，搭接縫有必要粘牢、精確、嚴厲，接縫邊際嵌填密封。蓋壓條有必要粘結結實，縫隙嵌填密封嚴實。卷材外表平坦，收頭結實。組成高分子防水涂膜總厚度規則不該小于2mm，防水層外表應平坦無折皺。
Jinan introduced waterproof layer waterproof sheet lap paving way and construction process should be consistent with the rules of order, lap width should fit the demand, it is necessary to take joint cement, precise, strict, marginal
joint filling them sealed. Layering is necessary to cover the bonding firm, cracks filled, tightly sealed. Coil look flat, closed head strong. Polymer waterproof coating composition rule should not be less than the total thickness of 2mm, the outer waterproof layer should be flat without wrinkles.
3、濟南防水分析細部結構做法有必要契合規劃需求，每完結一道工序應有專人查看，特別是隱蔽工程要到達合格，經檢驗后方可進行下道工序。
Jinan waterproof construction practices detailed analysis is necessary to fit the program requirements, each end of a process should be someone to view, especially the hidden works to reach qualified, after examination before the next
step.
4、濟南防水http://www.tianyujian.com/提醒地下室防水工程施工結束，應及時收拾悉數技術資料，做好歸檔作業。
Jinan waterproof remind basement waterproofing works construction is completed, should be packed full of technical information, good archive operations.