造成窗框周邊漫滲的原因有結構形變，密封材料脫落，窗框周邊有細小裂縫，窗框周邊有空穴存在及安裝誤差大。那么窗體防水應該如何處理呢？
1、清理窗框周邊，查找滲漏縫隙，分析滲漏原因；
Clean up the sash perimeter, find leakage gap analysis leakage causes;
2、對于墻體內部存在空穴的部位，根據具體情況考慮化學灌漿或填充其它彈性防水材料；清理縫隙表面，其表面不應有油污，浮塵等隔離物；在窗框周邊縫隙內嵌填彈性密封材料；
For wall holes that exist within the site, depending on the circumstances consider chemical grouting or filling other flexible waterproof material; clean up the gap surface, the surface should not have oil, dust and other spacers; embedded in the frame to fill the gap around the elastic sealing material ;
3、試水檢驗防水效果，主要是在窗戶的外面做防水處理，一般是墻面上批刮耐水膩子、刷防水涂料。當然，如果事先做一下基礎防水的話，那么防水的效果會更好了。在室內的話，一般是不做防水處理的，因為如果外面漏水的話，在里面在防水的效果不會太理想的。但從防潮的角度來看，室內做防水處理還是有好處的，要打玻璃膠或在外面做防水。
Test the water test water effects, mainly in water treatment done outside the window, usually Scraping the wall of water putty, waterproof paint brush. Of course, if you do some basic water beforehand, then the effect will be better waterproof. In the interior, the general is not waterproof, because if word leaks out, in which the effect of the water is not too ideal. But from the perspective of moisture, interior waterproofing or do good, to fight on the outside glass, plastic or waterproof.