由濟南防水公司得出結(jié)論認為漏水原因主要有以下幾點：
1.屋面卷材防水施工存在缺陷，卷材在伸縮縫翻邊位置搭接，搭接位置不當(dāng)；
1 roll roofing waterproofing construction defects, roll seam flanging position lap on lap telescopic, improper location;
2.設(shè)計原因伸縮縫翻邊二次澆注，混凝土接縫處容易滲水；
2 reasons for the design of expansion joint two flanging pouring concrete joints, easy leakage;
3.排煙管在屋面施工完成后安裝，在屋面樓板上鑿洞破壞了原有防水層，且補洞時未做 防水處理；
3 the exhaust pipe is installed on the roof after the completion of construction, boreholes, destroyed the original waterproofing layer on the roof floor, do waterproof processing and did not fill the hole at;
4.靠近二期建筑物外墻滲水主要是外墻未做防水，暴雨沖刷外墻造成滲漏；
4 close to the two period of building external wall seepage wall mainly is not waterproof, exterior wall leakage caused by torrential rain;
5.在外墻砌體未沉降密實時完成了斜磚砌筑，斜磚未頂緊密實；
5 in the exterior wall of not settling dense real-time completed the diagonal brick masonry, brick not inclined top tight real;
6.窗邊滲水主要是因為窗框塞漿未密實，窗邊密封膠施工質(zhì)量較差。
6 window seepage is mainly because the window frame plug slurry is not dense, poor quality of construction window sealant.
濟南防水：http://www.tianyujian.com/